How Do You Replace Pedestal Sump Pump

Pedestal sump pumps are nothing short of a godsend to people who have a tiny pit in their homes. It works just as well as any other model, and you can place it anywhere so that you can easily access it anytime, unlike the ones you have to keep at the bottom of the hole.

If you make the right purchase, then you will have a gadget that will protect your home for years. However, one of the most common question among homeowners is, "How do you replace a pedestal sump pump?"

You might be nervous about replacing it because of how expensive these units are. One wrong twist, and you might damage it. However, if you follow the following steps, you will be able to make a quick replacement.

So, How Do You Replace Pedestal Sump Pump?

Here we will detail the replacing process in the easiest manner.

Find The Right Equipment

A lot of people have a misconception about the necessary tools to replace pedestal sump pumps. You will be surprised to know how easily accessible they are. Furthermore, you can find all of the different objects you will need for this task in any regular toolbox.

These tools include a pipe wrench, gloves, glasses, PVC pipe, Tape measure, and a hacksaw. There are some tools that you may have to buy, like white cement and PVC primer. However, they won't cost you too much.

Removing the Previous Sump Pump

Before you can even start with the replacement process, you will have to extract your old pedestal sump pump. Make sure that you cut off its power before you get your hands to it. Start by disconnecting the device's cord from the power outlet and taking the pipe out.

A little bit of physical strength will be necessary here because you will need to bring the gadget out now. Be sure to grab it by the handle so that you can channel your strength appropriately and not strain yourself out.

Now that you have the pedestal sump pump out, it's crucial to quicken the pace. Immediately put it on the basement floor after you extract it and avoid putting it on wooden furniture as the water might ruin it. Pick up a rake or a shovel and use it to move the gravel equally around the bottom of the pit.

Once you complete leveling the pit, you will want to preserve the PVC pipes you have been using on the previous gadget to avoid extra expenses. Use a hacksaw to cut into the lines without having to ruin its body and also maintaining its dimensions.

Looking for new pump? Here you can find our list of best pedestal sump pump, check it out.

Reattaching the Pipeline

Before you can reinstall the device, you will need to ensure that the pipe network is formed correctly and working smoothly and consistently. Not having the pipes in their proper place can result in the water not moving around correctly and can even result in defects.

Start by taking the pipes' measurements and check if they are alright in case you plan on using old ones.

In the event that you're using a check valve, you can go ahead and start fitting them in immediately-having one of these guarantees that you can control the water flow. It will prevent the water from entering the pit while you're connecting the pipes.

The next step is priming the pipes. Conduct this process on the check valves and attach the outer tube to the one used for discharging. Now start connecting the components with the help of hose clamps. Attach the pipe with one end to the valve and the other with the pipeline.

After letting the valve settle onto the pipeline, prime the other valve openings and keep on putting the pipe through it, then secure the pipe and fit it to your discharge line with the help of a male connector. Once the attaching process is complete, seal it thoroughly with some white cement.

Connecting the New Sump Pump

Perhaps the most crucial step, you will need to connect the new pedestal sump pump as soon as the cement becomes dry. Start by putting the product into a water container and clicking it to a power source. If water doesn't go out of the container, then there is a chance that the product isn't working or the pipe is clogging.

Be sure to exercise every possible precaution when making the connection. Take your time and carefully insert the pump into the pit with its base evenly on the ground. Do not let its float switch come in contact with the pit walls under any circumstances.

Once you complete the placement safely, it's time to connect its valve to the rest of the pipeline. Finally, have the new pipeline attached to your home's one with the use of union connectors.

Checking the Performance

Last but not least, it is now time to see if the installation is done correctly and observe if the sump pump is functioning properly. Ideally, it's best to conduct this test with a minimum of 5 gallons of water.

Let the pump begin its cycling process and the switch on the gadget. The efficiency of the product can be understood by how fast and quickly it drains out the water. If you find the process to be taking too much time, then consider checking the pipeline for clogging.

In case that is the case, then simply take a wire and start poking around the pipe to alleviate the stagnation.

Final Words

Pedestal sump pumps are pivotal to ensure that the basement of your house doesn't succumb to flood and keep the contents safe from harm. Therefore, you must maintain it regularly and replace it whenever it is necessary.

Now that you have gone through our article, you will never have to look up "How do you replace a pedestal sump pump" ever again! Gone are the days of having to hire a plumber or rushing back to the hardware store because of an accident with this small gadget. You can rest easy knowing that your house-will remain flood-free indefinitely.