by Kimberly Hill
Repairing a car is not always easy. You sometimes have to take the risk of going under it by elevating it with a jack stand. And there are two types of jack stands to do this job, the regular one and the heavy-duty one. It is safer to opt for the heavy-duty one since it can hold more weight.
Since you will be lifting your car and going under it, it is better to be safe than sorry. Therefore, we have prepared a list of the 20 best heavy-duty jack stands since it is best to go for a good quality jack stand that is robust and strong.
Contents
Without further ado, let's take a look at our comprehensive review of the top 20 picks provided below:
Our first pick on this list is a great jack stand from Torin, having a capacity of lifting 6000 lbs. or 3 tons of weight. Despite having such a massive duty capacity, the stand is extremely lightweight. It comes with a broad pyramid base that acts as a foot and provides necessary support to the frame.
This jack stand is made of high quality forged steel and is shielded with a welded frame, which enhances its longevity. Furthermore, you can lift a range of vehicles, starting from small cars to SUVs and small-sized trucks.
This impressive jack stand from AmazonBasics is also a great choice to lift heavy-duty vehicles weighing about 3 tons. Each pack comes with two such stands making it a pair capable of lifting SUVs to lightwight trucks. You must use the two stands at once to utilize its maximum capacity.
The jack stands also comes with a self-locking mechanism that makes putting on a lock critical unnecessary. Moreover, the stands comply with the safety standards set by ASME PASE-2014. Lastly, you can elevate the vehicle to your desired height and adjust it up and down using it.
Pro-lift is a trusted name when it comes to making durable products for your automobile. This pair of jack stand, too, does not deviate from this standard. It is made of high-quality and robust steel and has double the capacity of the previous picks. The pair is capable of lifting a 6-ton vehicle at once.
This jack stand is equipped with a ratchet bar made of high quality cast ductile iron. Moreover, to ensure maximum safety, you can use its double lock system that contains both a handle lock and a mobility pin. You will also be able to adjust the height of the vehicle using it.
This jack stand, too, is meant for heavy duty vehicles that weigh about 6 tons or 12000 lbs. Starting from small cars to jeeps, you can also lift ATVs and UTVs using it. On top of this, the stand contains a double locking mechanism, which ensures the operator's safety who is repairing the vehicle.
The jack stand comes with a wide saddle, which provides sufficient area to support the weight being loaded onto it. Moreover, it is made up of heavy-duty steel, which is welded, maintaining industry standards to enhance its durability and longevity.
The fifth pick on our list is another contender from Pro-lift. This one, unlike the previous selection, has a lower capacity of 3 tons. So if you are the owner of a small-sized car or an SUV, you can opt for this jack stand. It is made up of strong and sturdy steel that makes it highly durable.
The stands are provided with a dual locking system that comes with a handle lock and a pin for mobility. On top of this, a ratchet bar made of iron is also provided. And you will also have the flexibility to adjust the height of the vehicle according to your preference.
If you own a big vehicle like an SUV or a medium-sized truck, our sixth pick will be an excellent choice for you. This jack stand from Performance tool can lift any vehicle weighing 6 tons or 12,000 lbs. It comes in a pair, and you need to use both to obtain its maximum efficiency.
The jack stand comes with a ratchet that makes it easier to adjust. You can change its height within the bracket of 15-1/2 inch to 23-1/2 inch. Therefore, you will have the flexibility to elevate your car to a desirable size to repair it conveniently.
This pick is unique compared to the previous ones since it combines a jack stand and a bottle jack in the same unit. Therefore, you will get to enjoy the utility of two devices in one single product. It has a lifting capacity of about 3 tons, making it suitable for small sized vehicles, SUVs, and light weight trucks.
You can elevate the vehicle to your desired height and lock it onto position using its safety bar locks. The jacks are made of steel, which makes it highly durable. Moreover, it is provided with a steel base wide enough to bear a heavy vehicle load.
For lifting heavier vehicles weighing 6 tons, this pair of jack stand from CARTMAN will be a great choice. The set contains two jack stands, both made of heavy-duty steel. You will have the flexibility to adjust it as you like using its quick adjustment settings.
The height adjustment mechanism ranges from 15″ to 24," giving you ample opportunity to adjust the vehicle to a desirable elevation. Moreover, the overall stand is equipped with a welded frame that gives it maximum durability.
Available in two colors, red and silver, this pair of jack stand from Torin is made up of aluminum. This makes the stands very portable due to their lightweight figure. However, don't be deceived by its weight since it can lift vehicles as massive as 3 tons or 6000 lbs.
So whether you own a small car or an ATV, you can use this stand to lift it. The frames are equipped with a removable locking support system. The equipment contains six locking positions that can give you added flexibility. Moreover, you can adjust its height within a range of 10-3/4″ to 15-5/8″.
The 10th pick on our list is another item from Torin in its signature red-colored design. Each set comes with a pair of jack stands, together with having a capacity of lifting 3 tons or 6000 lbs. of weight. Moreover, the stands are made up of steel, which makes it highly durable and robust.
The stands provide you the flexibility to adjust the vehicle's height within the range of 14″ to 20-1/2″. On top of this, the stand also contains a saddle that provides a broad base to support the load being lifted better.
If you own a small light car and are not interested in a jack that has a high capacity and not too expensive, then our 11th pick will be perfect for you. This jack stand has a lifting capacity of 2500 lbs, which is good enough to safely lift small cars. Moreover, it is made of high-quality steel which makes it very durable.
The jack stand is equipped with a lock washer that enables you to lock the vehicle into position when it has been elevated into a desirable height. In addition, there is a 1 inch zone to provide additional safety around the lock washer.
After mentioning a jack stand suitable for small cars, we have once again included another heavy duty jack stand as our 12th pick. Manufactured by Performance Tool, this stand has a lifting capacity of 6 ton or 12000 lbs. It also can lift up a vehicle at a minimum height of 15-1/2″ and a maximum height of 23-1/2″.
Made of high quality steel, this jack stand is very durable and long-lasting. It also contains a frame and a wider base which gives ample space for the load to be lifted safely.
Out of all the jack stands that we have mentioned till now, this one has the highest lifting capacity. Produced by Sunex, this heavy duty jack stand has the ability to lift a maximum weight of 10 ton, making it suitable for working on heavy vehicles and trucks.
The stands are equipped with a four legged base made of steel. Moreover, there are some schedule pipes that enhance its stability. The length of the pipe is about 38.27 inches. You can also adjust the height to a desirable elevation.
With a capacity even higher than the last pick, our 14th pick is a great jack stand manufactured by Torin. This one is capable of lifting up automobile weighing as heavy as 12 tons. Therefore, if you own a truck, you should definitely go for this jack stand.
This jack stand has been made with high quality steel that gives it maximum durability. On top of this, it is coated with a lead-free paint that acts to prevent rust. The paint is also resistant against pollutants like oil and dirt, which makes cleaning up a lot easier.
After mentioning some jack stands with a high capacity, we have chosen a lightweight jack stand that can be used to lift up lighter vehicles like small cars. And if you love vintage things, then this jack stand will be great for you. It has been manufactured before 2000 and it is completely handmade.
Apart from being made with aluminum, the set comes in a pair. Its height is adjustable and can be extended to a maximum elevation of 16 inches. Its minimum height adjustment stands at 4 inches.
If you own a big truck or an extremely heavy vehicle, then you must prefer a jack stand that can endure heavy weight and still manage to stand safely. Our 16th pick matches this requirements perfectly and is an extremely durable stand made of steel. Its lifting capacity is 22 tons, making it the safest stand on this list.
The outer frame of the stand is welded with steel which enhances its stability and sturdiness. Moreover, such a high standard construction prevents any sort of twisting or distortion in its structure.
This miniature jack stand is most suitable for situations when you need to do simple operations like a tire change. You can tell by its name that it's small in size. It comes in a set of four and can provide a height adjustment ranging from 48mm to 82mm (2″ to 3 1/8″).
This set is available in the color red and will prove to be a great tool in case of fixing frequent tire punctures. Another different thing about this tool is that it is 3D printed and hence bears a unique design.
The 18th pick on our list is a pair of heavy duty jack stand that has a lifting capacity of 6 tons. It complies with all the standards set by ASME and therefore is completely safe to use. In addition. It is made of high graded steel that increases its durability and makes it more reliable.
To ensure added safety, the tool comes with a safety pin that further locks the vehicle into position when it has been lifted above. On top of this, it also contains a self-locking ratchet.
This pair of jack stand from Omega is a tool that you can trust completely for lifting up any heavy vehicle. Available in the color black, this strong and sturdy jack stand has a lifting capacity of 22 tons. It is also made of welded steel which further increases its durability.
In order to adjust its height, you can use the heavy duty holding pins provided with it. It also comes with a wide saddle that gives adequate support to the load.
Despite being the last pick, this jack stand is no less than the other contenders on this list. It has a lifting capacity of 6 tons and it bears the signature red design of Torin.
The jack stand is made up of heavy duty steel which gives it maximum durability. In addition, it has a height adjustment setting ranging from 15.5 in. to 23.8 inches.
Also Check : Best Heavy Duty Linear Actuator
We hope this list of the 20 heavy duty jack stands was helpful for you. Picking any of these choices won't leave you disappointed.
BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, - Walmart Link
Sunex 1310 10-Ton Medium Height Pin Type Jack Stands, Pair - Walmart Link
BIG RED T41202 Torin Steel Jack Stands: 12 Ton (24,000 lb) Capacity, Red, 1 Pair - Walmart Link
Omega 32225B Black Heavy Duty Jack Stand - 22 Ton Capacity - Walmart Link
Omega Lift Heavy Duty 6 Ton Jack Stands Pair - Double Locking Pins - Handle Lock and - Walmart Link
SUNEX TOOLS 1522A 22-Ton Jack Stands, Pair - Walmart Link
OTC S022 Jack Stands - 22 Ton - Walmart Link
BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, - eBay Link
Sunex 1310 10-Ton Medium Height Pin Type Jack Stands, Pair - eBay Link
BIG RED T41202 Torin Steel Jack Stands: 12 Ton (24,000 lb) Capacity, Red, 1 Pair - eBay Link
Omega 32225B Black Heavy Duty Jack Stand - 22 Ton Capacity - eBay Link
Omega Lift Heavy Duty 6 Ton Jack Stands Pair - Double Locking Pins - Handle Lock and - eBay Link
SUNEX TOOLS 1522A 22-Ton Jack Stands, Pair - eBay Link
OTC S022 Jack Stands - 22 Ton - eBay Link
About Kimberly Hill
Now it is just me, Kimberly Hill living in New York city, N.Y.
Loves to blog about various aspects of life that matter most.
Received the BA degree in Art History from Stanford University of California.
 |
 |
 |
 |
Popular Posts
Homer